Sand Testing Equipments

Mechanism: Consists of two ploughs, motor, Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Batch capacity 10 Kg.

Misc Spec.:

Sand Type: Green Sand, No-bake Sand, Oil Sand, CO2 Sand, Cold box sand, etc.

Test:.

Application:To mix core sand

Precautions:

Clean the machine after use.

Maintainance:

Please contact us for more information.

Testing Prcoedure:

Please contact us for test procedure.

Optional Models: 

Sand Mixer (4 Kg Capacity) (VCS4)

Pre-Requisite Equipments: 

May require Sand Sampler (VJS), Sample tray (VJT), Sand splitter (VJL)

Additional Information:

Item Code: VCS10

Misc Spec.:

Consists of a holder to hold the tensile core box, gas sealing facility and nipple

Sand Type: CO2 Sand

Test:Pre-reuisite for tensile strength

Application:To pass the co2 gas through the tensile specimen without leakage

Maintainance:

Clean the equipment after use.

Optional Models:

Pre-Requisite Equipments: Sand rammer with base block (VR+VRB) and Tensile core box (VCB)

Misc Spec.:

Consists of a holder to hold transverse core box, Gas sealing facility and nipple

Sand Type: CO2 Sand

Test:Pre requisite for Transverse strength of CO2 sand.

Application:To pass the CO2 gas through the Transverse Specimen without leakage.

Maintainance:

Clean the equipment after use.

Testing Prcoedure:

For more details Contact us.

Optional Models:

Pre-Requisite Equipments: Sand rammer with base block (VR+VRB) and Transverse core box (VTB)

Mechanism: Consists of sheet metal housing with splits and two containers.

Misc Spec.:

Sand Type: Shell sand

Application:Sand splitter is designed on well-known principle of repeated division of sample to get representative sample.

Precautions:

Clean the machine after use.

Testing Procedure:

Please contact us for test procedure.

Optional Models:

Pre-Requisite Equipments: VJS.

Misc Spec.:

Consists of a Split tube with locking springs and drying plate.

Sand Type: Green Sand

Test:Specimen preparation for low immediate green strength materials

Application:

• This is used to prepare standard cylindrical specimen of sand having Low Green Compressive strength.
• It replaces the standard Specimen tube and is used for ramming the specimen.

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting
• Apply rust preventing oil when not in use.

Misc Spec.:

Consists of dumbbell shape split core box to get tensile strength specimen, base plate, hopper & plunger to match the shape of the core box.

Sand Type: No-bake Sand, CO2 Sand, Core oil sand.

Application:To prepare the tensile specimen

Maintainance:

Clean the equipment after use.

Optional Models: Gang tensile core box (VGT)

Pre-Requisite Equipments: Sand rammer with base block (VR+VRB) and only in case of CO2 sand : CO2 gassing accessory for ttensile specimen (VOCC)

Misc Spec.:

Consists of split core box to get transverse strength specimen, base plate, hopper & plunger to match the shape of the core box.

Sand Type: No-bake Sand, CO2 Sand, Core Oil Sand.

Application:To prepare the transverse specimen of sand specimen bonded with No-bake/ Air set or Core oil or silicate type binders.

Maintainance:

Clean the machine after use.

Optional Models: Gang transverse core box (VTBG)

Pre-Requisite Equipments: Sand rammer with base block (VR+VRB) and only in case of CO2 sand : CO2 gassing accessory for transverse specimen (VOCB)

Misc Spec.:

Consists of base plate to accommodate specimen tube with cup & Riddling sieve.

Sand Type: Green Sand, Oil Sand, CO2 Sand

Application:The equipment must be used to fill sample tube with sand. Advantage is it lets the sand fill in from fixed distance and riddles it before filling. It avoids compression of the sand which may occur if we fill the specimen tube with hands and can effect compactibility readings heavily.

Maintainance:

Clean the equipment after use.

Optional Models:

Pre-Requisite Equipment's: Sand Rammer with base block VR +VRB , Compactibility tester (VCT), OR Split specimen tube (VST)

Misc Spec.:

Consists of tube furnace i.e combustion tube with maximum temperature range of 1000°C, equipped with automatic Temperature indicator cum controller, 10 boats, boat pusher, stop cork and necessary rubber tubing & volumetric glass apparatus.

Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz).

Sand Type: Resin coated sand

Test: Determination of Gas evaluation of sand mixture

Application:

To know the Rate and Amount of gas evolution from any particular sand mixture.

Precautions:

• Do not move the machine when the heaters are hot.
• Burning hazard: keep away when in hot condition.
• Do not move the combustion tube when it hot condition to avoid breakage.
• DO not turn off the machine without bringing down the furnace temperature manually to 300 C.

Mechanism: Consists of Carbide tipped plough, dial indicator.

Misc Spec.: Employees scratch type test to check bonding and hardness of cores.

Sand Type: Resin coated sand, Hot box sand, Cold box sand, No-bake Sand, Oil Sand, CO2 Sand

Test: Reads hardness of Cores of most of the types.

Application: To find out the hardness of baked or dried cores made out of core sands, resin sands etc.

Precautions: Keep the instrument clean and away from dust ensure that all sticking sand is removed from the instrument before and after every test.

Do not tamper with the setting and calibration

Mechanism:

• Controlled Temperature Furnace: 850 C (Adjustable)
• Suitable Computer with OS and Software to record readings, compare graphs, Set Ideal graphs and/or Compare Results with +/-3 Sigma limits to check off limit samples.

Precautions:

• Extremely Hot Exteriors, Do not touch.
• DO not move the machine once switched ON

• Sand Splitter
• Sand Sampler
• Precision Weighing Balance

Digital Permeability meter is a research grade equipment which can also be used in day to day practice to check Permeability of Foundry Sands. It uses the proven dead weight method coupled with high sampling electronics to know exact value of permeability without much user interference.
Optionally Readings can be sent to PC or Printed with printer which can be attached to the equipment.

Categories: According to Sand type, Equipment for Cold Box Sand, Equipment for Green Sand, Equipment for NO BAKE sand, Equipment for Resin Coated sand (Hot), Testing Equipment CO2, Testing equipment for Resin Coated Sand, Testing Equipment Green Sand, Testing Equipment No Bake, Testing Equipment(Cold Box).

For No-bake (Air set) Sand: Gang Compression Core Box (VGC)

For CO2 Sand: Rammer with base block (VR+VRB), Split specimen tube (VST), CO2 Gassing accessory for Compression specimen (VOCA).

Sand Type: No-bake Sand, Oil Sand, CO2 Sand

Test:Compression strength

Application:This is useful to determine the Compression strength more than 15 Kg/cm2 up to 60 Kg/cm2. This attachment is to be used with Universal Strength Machine(Digital) (VUD)).

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.

Mechanism: Fully automated, full proof heating mechanism, recording and sensing mechanism to 0.01mm accuracy.

Misc Spec.:

• Consists of fully automated burning mechanism to heat the specimen to get a Hot distortion Curve. Single touch operated instrument.
• PC loaded with licensed Windows XP^tm & Single user license of Hot distortion Software.
• Hot distortion software offers following facilities.

1. Easy interface for a normal user to declare & judge results of test.
2. Store, retrieve, compare, and analyze distortion curves.
3. Statistical techniques to set statistical curve limits & comparison of the graph with the same.
4. Run charts at specified time intervals.
5. Ability to set and compare ideal curves.
6. Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz).

Application:

Application is to determine how Sand and binder combination works together.
Dilation, Shake out, stressed castings, high development costs for difficult cored castings can be trouble shot with this apparatus.
For detailed information please contact us.

BURNING HAZARD: Do not handle the flame.
Check gas connections for leakages before starting the test.

Maintainance:

Clean the Burner aperture from sand traces.

Testing Prcoedure:

Contact us for detailed testing procedure.

Optional Models: NA

Pre-Requisite Equipments: Universal shooter (VUS) OR Cold box shooter (VSSC) OR Hot box shooter (VSS) OR Shell transverse specimen curing accessory VTGA, Shell transverse specimen accessory VTGB.

Mechanism: Consists of probe to read relative permeability directly on moulds.

Misc Spec.:

Sand Type: Green Sand, No-bake Sand, Oil Sand, CO2 Sand

Application: To determine the relative permeability of moulds directly on moulding boxes in conjunction with MODEL VEP/VP

Precautions:

Clean the equipment after use. Protect the Parts from rusting; apply rust preventing oil when not in use.

Testing Prcoedure:

Please contact us for test procedure

Optional Models:

Pre-Requisite Equipments: Permiability meter (VP) OR Electro-permeter (VEP)

Mechanism:

Consists of housing with ramming mechanism, which gives constant ram energy to the steel pointer & use for chemically bonded sands i.e dry moulds.

Misc Spec.:

Sand Type: Chemically bonded sands.

Test: Resistance to penetration

Application: To determine the penetration depth and resistance against ramming on cylindrical test specimen in laboratory and on finish moulds in the Foundry.

Maintainance:

Oil the moving parts and clean them before use.

Testing Prcoedure:

Contact us for test procedure.

Optional Models:

Pre-Requisite Equipments: May require Sand Rammer with Base block (VR+VRB) for Laboratory testing.

Mechanism: Consists of two splitting pads

Misc Spec.:

Consists of two splitting pads which can be used along with Universal strength machine (Digital) (VUD) OR Universal strength machine (Hydraulic) (VUN).

Sand Type: Green Sand, No-bake Sand, Oil Sand, CO2 Sand

Test:Splitting strength
Application: The splitting strength can be measured on Green cylindrical Test Specimen by putting the specimen in the attachment in such a way that, it will be compressed on the diameter. The specimen cracks along the diameter to give splitting strength. It can be used as an indirect measure for tensile strength testing of clay bonded sands.

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting
• Apply rust preventing oil when not in use.

Mechanism: Consists of Specimen holder assembly and knob

Misc Spec.: Can be used with Universal Strength Machine (Digital) (VUD) OR Universal Strength Machine (Hydraulic) (VUN)

Sand Type: Hot box sand, Cold box Sand, Resin coated sand, No-bake Sand, Oil Sand, CO2 Sand

Test: Tensile Strength

Application: The attachment is used on Universal strength machine (Digital)(VUD) OR Universal Strength Machine (Hydraulic) (VUN) to check Tensile strength of prepared Bumbbell i.e Dog-Bone shpe specimen.

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.

Mechanism:

Hydraulic+Pneumatic

Misc Spec.: Auto testing cycles on just a button press. Can conduct Test for compression, tensile, shear, splitting strength specimen with appropriate attachments.

Other Features Include :

Calibration reminder.
Equipment life counting.
Way faster, better and accurate result processing than its predecessor (VUD)
Diagnosis mode for fault detection 

Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2.

Computer interfacing is optional with Customized sand control software i.e VEsion Sand. Please contact us for more information.

Sand Type: Almost all types of Sands

Test: Strength

Application: To Test Various strengths for moulding and core sands.

Precautions:

SQUEEZING HAZARD: Do not put your hands between actuated pads or attachments.
Make sure that there are no pressure drops due to leakage in the system, ensure the pressure to be 4Bar.

Maintainance:

Clean the equipment after use.

Testing Prcoedure:

Contact us for more details.

Optional Models: Universal strength Machine (Hydraulic) VUN

Pre-Requisite Equipments: Sand Rammer and test specific specimen preparation accessories.

Mechanism:

Consists of hydraulic unit, high and low pressure gauge, set of compression pads, compression range high up to 13 kg/cm2, low up to 1600 gms/cm2.

Misc Spec.:

Strength Measurement range:

Low pressure gauge â

1. Compression-0 to 1600gms/cm2,
2. Shear -0 to 1300 gms/cm2,
3. Tensile- 0 to 6 kg/cm2
4. Transverse-0 to 60 kg/cm2

High pressure gauge –

1. Compression-0 to 13 kg/cm2,
2. Shear -0 to 10 kg/cm2,
3. Tensile- 0 to 50 kg/cm2
4. Transverse-0 to 500 kg/cm2

With High Dry Strength Attachment (VUH):

1. Compression -20-200 kg/cm2

Test:Various Strength i.e. Compression, Shear, Tensile, Transverse & Deformation Strengths

Application:The equipment is used to determine various strengths, such as compression, shear, tensile, transverse and deformation, of foundry sand.

Precautions:

• Do not overload the Gauge.
• Keep the Equipment clean.
• Remove air completely from oil reservoir.

Mechanism: Consists of loading frame, loading mechanism, Force measuring mechanism, facility to accommodate various accessories, Digital strength indicator, Set of compression pad, compression range up to 15 kg/cm2 ( With High dry strength attachment (VUHD) Compression range =60 kg/cm2)

Misc Spec.:

THIS EQUIPMENT HAS BEEN PHASED OUT the replacement model is

Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). May Require Pneumatic air supply of 6 Kg/cm2 depending upon choice of variant.Computer interfacing is optional with Customized sand control software i.e VEsion Sand. Please contact us for more information. Range of Equipment

1. Compression-15kg/cm2,
2. Shear -12 kg/cm2,
3. Tensile- 60 kg/cm2
4. Transverse-600 kg/cm2
5. Direct Load -300 kg.
6. With High dry attachment : Compression -60 kg/cm2

Sand Type: Green Sand, Hot box sand, Cold box sand, Resin coated sand, No-bake Sand, Oil Sand, CO2 Sand

Test: THIS EQUIPMENT IS ABSOLETE

Application: The Equipment is used to determine various strengths, such as compression, shear, tensile, transverse and deformation, of foundry sand directly or with help of attachments.

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.
• Take care of Hands; Do not insert under the plunger.

Mechanism:

Shooting/ Blowing, Gas passing & purging. Fully automated cycle. User can set Amine passing time & air purging time.

Inbuilt amine evaporation mechanism.

Misc Spec.:

Consists of dumbbell / dog-bone shape split tensile core box, sand shooting arrangement, gassing & purging accessory, FRL unit suitable for cold box sand & heater with temp. indicator controller up to 230⁰c. Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz). Requires Pneumatic air supply of 6 Kg/cm2.

Sand Type: Cold box sand

Test: Pre-requisite for tensile strength test for Cold box Sand.

Application: To prepare specimen from cold box sand for Tensile strength, transverse strength & Hot distortion tests.

Precautions:

Burning hazard: the temperature is 230^oC. Conform that the quantity of sand is sufficient for sample specimen at every preparation. Insure that the gassing accessory is on the Core box before pressing

Maintainance:

Clean the core box & core box support vents after continuous run.

Testing Prcoedure:

for more details Contact us.

Optional Models: Universal shooter (Blower) (VUS)

Pre-Requisite Equipments: Universal Strength Machine (VUD) along with Tensile strength attachment (VAS)

Misc Spec.:

6 cavities to make compression specimens of No-bake (Air set)/ Core Oil Sand.

Sand Type: No-bake (Air set) Sand, Core Oil sand.

Test: Pre-requisite to compression strength

Application:

To prepare the Standard Cylindrical specimen of No-bake (Air Set) sand.

Maintainance:

Clean the box after use.

Testing Prcoedure:

For more details contact us.

Misc Spec.:

Core box to prepare 6 specimen at a time to check transverse strength (Bending strength).

Sand Type: No-bake Sand

Application:

To prepare the Transverse Specimen for No-bake sand

Precautions:

Clean the core box after use.

Testing Prcoedure:

For more details contact us.

Mechanism:

Consists of specimen holder assembly, aligning pin.

Misc Spec.:

Sand Type: No-bake Sand, Core Oil Sand, CO2 Sand, Hot box sand, Cold box sand, Resin coated sand

Test:Cold tensile strength

Application:

The attachment is used on Universal strength machine (Pendulum Type)(VUM) to check Tensile strength of prepared Bumbbell i.e Dog-Bone shpe specimen.

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.

Mechanism:

Consists of specimen holder and knife-edge.

Misc Spec.: Precision made attachment to check transverse strength (Bending strength) on Universal Strength Machine (Pendulum Type) (VUM)

Sand Type: No-bake Sand, Oil Sand, CO2 Sand

Test: Transverse strength

Application: To check the Transverse strength

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.

Mechanism: Consists of two rollers with double plough, FHP motor, working on Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz).  Batch capacity 5 Kg.

Misc Spec.:

Sand Type: Green Sand

Test:Mulling i.e Green sand preparation

Application:To Prepare a Small batch of Green sand for lab experiments or testing.

Precautions:

Do not put hand in the drum at any point of time.

Maintainance:

• Clean the machine after use.
• Check the Plough for wear depending upon extensiveness of use.

Mechanism:

Consists of one muller with single plough, FHP motor, working on Please inform supply specifications to adapt equipment accordingly (Default: 230v AC , 50Hz).  Batch capacity 2 Kg.

Misc Spec.: 

Sand Type: Green Sand

Test: Mulling i.e Green sand preparation

Application:

To Prepare a Small batch of Green sand for lab experiments or testing.

Precautions:

Clean the equipment after use.

Maintainance:

Contact us for More information

Testing Prcoedure:

Contact us for More information

Optional Models: Laboratory Muller (5Kg capacity) (VLM5)

Pre-Requisite Equipments: Sand Sampler (VJS), Sample tray (VJT), Sand splitter (VJL)

Mechanism: Consists of calibration sliding weight actuated by cam, a cup, a specimen stripper, a specimen tube to prepare the standard specimen of 50mm Dia. & 50mm Ht. (Or 1” Dia X 1” Height on demand)

Misc Spec.:

Sand Type: Green Sand, Oil Sand, CO2 Sand, Raw Sand i.e. Base Sand i.e Unbonded sand.

Test: Specimen preparation

Application:

To prepare standard test specimen.

Precautions:

Always Keep Rammer plunger in lifted condition with the help of lifting cam when not in use. Do not turn ramming cam handle and allow the weight to fall unless a sample is being rammed.

Maintainance:

Clean the equipment after use. Protect the Parts from rusting; apply rust preventing oil when not in use. Clean and lubricate all moving parts of the rammer. Clean the specimen tube before preparation of the specimen.

Testing Prcoedure:

Please contact us for test procedure.

Optional Models: Sand Squeezer (VCC)

Pre-Requisite Equipments: Base block (VRB) , Tube filler accessory (VTF) , Sand Splitter (VJL) These three are must have accessories.

Mechanism: Clay Washing along with automized cycle, microcontroller based electronic control box.

Misc Spec.: Auto Clay washer conducts clay washing cycles automatically. Number of cycles and washing time can be set by the user. It eliminates need of Siphoning out water manually and other major manual interventions such as time punctuality for siphoning etc, ensuring accuracy of readings.

Sand Type: Raw Sand, Green Sand

Test:

Application:To check Total clay contents of sand sample

Precautions:

Requires water connection.

Maintainance:

Contact us for more details

Testing Prcoedure:

Please contact us for testing procedure

Optional Models: Clay washer (Manual) VCW

Pre-Requisite Equipments: Rapid Dryer (VRD)

Precision Weighing balance

Mechanism: Consists of Strength measuring mechanism, specimen tray, to read compression strength up to 2500 gms/cm2.

Misc Spec.:

Sand Type: Green Sand, Clay bonded sand

Test: Green compression strength

Application:

To check the compression strength of Green sand.

Precautions:

• Lubricate all moving parts frequently.
• Keep the Equipment clean and away from the dust.
• Do not Tamper with the pre-calibrated Strength measurement unit.
• Overloading should be avoided.

Testing Prcoedure:

For more detailsContact us.

Optional Models: Universal Strength machine (Pendulum) (VUM) OR Universal Strength Machine (Digital) (VUD) OR Universal Strength Machine (Hydraulic) (VUN)

Pre-Requisite Equipments:Sand Rammer + Base block (VR +VRB)

Mechanism: It contains a heating mechanism engineered to precisely control the temperature of the heated object to the tune of 100-110 C. Temperatures above this range can cause variations in moisture readings observed hence typically available equipment in the market is not suitable for this purpose because they are not designed to maintain temperature of the heated sand in the band.

Misc Spec.: Digital moisture teller is specifically used to obtain precise moisture content in the sand.

Sand Type: Raw Sand, Green Sand

Application:To check moisture in variety of sands

Precautions:

• Move equipment carefully.
• Ideally equipment should be kept in non airy place, preferably in a glass box.

Mechanism: Consists of a Dial to read percentage of flowability of green sand, arrangement to swivel the dial.

Misc Spec.: 

Sand Type: Green Sand

Test: Flowability.

Application: This instrument is used to find out Flowability % of sand. This is the property of sand to fill cavities in the Pattern plate and to move under pressure in any direction towards the pattern surface.

Precautions:

Keep the position of dial on the safe side and away from the rammer plunger while ramming the sample.

Testing Prcoedure:

For more details contact us.

Optional Models:

Pre-Requisite Equipments: Sand Rammer with Base block (VR + VRB)

Mechanism:

Consists of a rubber base, sliding carriage assembly, cam with handle (Motorized optional / On demand), metallic blow, and 10mm gauge block & grooving tool.

Misc Spec.:

Sand Type: Bentonite

Test: Liquid Limit

Application: To determine the liquide limit of bentonite

Maintainance:

Clean the machine after use.

Testing Prcoedure:

For more details contact us.

Optional Models:

Pre-Requisite Equipments: Motorized Liquid Limit tester (VLLM)

Misc Spec.: Consists of digital indicator and special geometry plunger to read hardness of Green Mould from 0 to 100 Nos.

Sand Type: Green Sand

Test: Mold hardness

Precautions:

Keep the instrument clean and away from dust ensure that all sticking sand is removed from the instrument before and after every test.
Do not tamper with the setting and calibration

Testing Prcoedure:

Please contact us for more information

Optional Models: Mold Hardness tester (analogue) (VMHB)

Mold Hardness tester (VMHC) (For High pressure molding)

Pre-Requisite Equipments: NA

Misc Spec.:

Consists of a holder to hold the split specimen tube (VST), gas sealing facility and nipple.

Sand Type: CO2 Sand

Test:Pre-requisite for Compression strength

Application:To pass the co2 gas through the compression specimen without leakage.

Maintainance:

Clean the machine after use.

Testing Prcoedure:

For more details Contact Us.

Optional Models:

Pre-Requisite Equipments: Sand rammer with base block (VR+VRB) and Split specimen tube (VST)

Misc Spec.: Consists of sealing tube and air balloon pump.

Sand Type: Green Sand, No-bake Sand, Oil Sand, CO2 Sand

Test:Permeability of prepared core specimen

Application: To determine the relative permeability of prepared core specimen in conjunction with Permiability meter (VP) ORElectro-permeter (VEP)

Precautions:

Clean the equipment after use. Protect the Parts from rusting; apply rust preventing oil when not in use.

Testing Prcoedure:

Please contact us for test procedure.

Misc Spec.:

Consists of two shear pads to fix on Universal strength machine (Pendulum type) (VUM).

Sand Type: Green Sand, No-bake Sand, Core Oil Sand, CO2 Sand

Test: Shear strength

Application: To Determine Shear strength of sand with the help of Pendulum Type Universal Sand Strength Equipment (Pendulum) (VUM).

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting.
• Apply rust preventing oil when not in use.

Mechanism:

Consists of Supporting frame, loading lever system, locating collar to fix attachment to Universal Strength machine (Hydraulic) (VUN), Ring nut and Connecting rod.

Misc Spec.:

Adaptible only to Universal strength machine (Hydraulic) (VUN)

Sand Type: Green Sand

Test: To Check Low Green Compression strength

Application:

To measure the Compression Strength from 20 g/cm2 up to 320 g/cm2 of Weakly bonded sands using Universal Strength machine (Hydraulic) (VUN).

Precautions:

• Clean the equipment after use.
• Protect the Parts from rusting
• Apply rust preventing oil when not in use.

Mechanism:

Consists of hydraulic unit, holder to hold specimen, plug in connection to fix the attachment to Universal Strength Machine (Hydraulic) (VUN) to read compression strength up to 200 kg/cm2.

Misc Spec.:

Other equipments which, one may have prior to acquiring this equipment would be niversal strength equipment mechanical (Hydraulic) (VUN) along with appropriate specimen preparation apparatus e.g
For No-bake (Air set) Sand: Gang Compression Core Box (VGC)
For CO2 Sand: Rammer with base block (VR+VRB), Split specimen tube (VST), CO2 Gassing accessory for Compression specimen (VOCA).

Sand Type: No-bake Sand, Oil Sand, CO2 Sand

Test: Compression strength

Application: This attachment to Universal strength machine (Hydraulic) (VUN) is useful to determine the compression strength more than 13 Kg/cm2 up to 200 Kg/cm2.

Precautions:

• See the oil level once in a month. Do not use the attachment for the Test specimen having compressive strength more than 200 Kg/cm2 and shear strength more than 150 Kg/cm2.
• Clean the equipment after use. Protect the Parts from rusting.
• Apply rust preventing oil when not in use.