|
Products
|
We offer Micro Hardness Testers
|
Micro Hardness Testers  Our range of micro hardness tester are imported from Japan and are ideally suited to the measurement of thin hard coatings, thick soft coatings and bulk materials. It provides accurate and reproducible values for materials hardness and elastic moduli. Our hardness tester are also available with image analysis systems. The specifications of our micro hardness tester are as follows: - Measuring range is 5-3000HV
- Test force is 0.09807, 0.2452, 0.4904, 0.9807, 1.961, 2.942, 4.904, 9.807N (10, 25, 50, 100, 200, 300, 500, 1000gf)
- Magnifications of the measuring system is of 500X, 125X
- Min. scale value of measuring microscope is 0.025im
- Max. height of test piece is 75mm
- Depth of throat is 100mm
- Required power supply is 220V AC
- Available in dimensions 340 x 160 x 375mm
- Its weight is approx. 40kg
|
|
Send Enquiry Digital Display Microhardness Tester Model  We offer Digital Display Microhardness Tester Model - Daksh Microhardness Tester Model DHA 1 Digital Display Features - Automatic turret shifting between penetrator and object lens.
- Built-in printer
- RS232 interface
- High resolution and high brightness LCD display
- Inside light source color can be changed as per customer's demands
Specifications - Measuring range: 5-3000HV
- Test force: 0.09807, 0.2452, 0.4904, 0.9807, 1.961, 2.942, 4.904, 9.807N(10, 25, 50, 100, 200, 300, 500, 1000gf)
- Magnifications of the measuring system: 400X, 100X
- Min. measuring unit: 0.025 μm
- Max. height of test piece: 75mm
- Depth of throat: 110mm
- Power supply: 220V/110V AC, 50Hz
- Dimensions: 470 x 320 x 500mm
- Weight: approx. 50kg
Main Accessories - Coordinate Anvil: 1 Pc.
- Thin Shaft Anvil: 1 Pc.
- Thin Plate Anvil: 1 Pc.
- Flat Nose Pliers: 1 Pc.
- Large V-Notch Anvil: 1 Pc.
- Small V-Notch Anvil: 1 Pc.
- Diamond Pyramid Penetrator: 1 Pc.
- Micro-Vickers Standardized Block: 2 Pcs
|
|
Send Enquiry Daksh Microhardness Testers Item Code: DHB2 We offer Daksh Microhardness Tester Models Features - Built-in printer
- RS232 interface
- High resolution and high brightness LCD display
Specifications - Hardness Measuring Range: 5-3000 Hv
- Test Force: 0.09807, 0.2452, 0.4904, 0.9807, 1.961, 2.942, 4.904, 9.807N(10, 25, 50, 100, 200, 300, 500, 1000Gf)
- Magnifications Of The Measuring System: 400X, 100X
- Min. Measuring Unit: 0.025 Μm
- Max. Height Of Test Piece: 75Mm
- Depth Of Throat: 110Mm
- Power Supply: 220V/110V Ac, 50Hz
- Dimensions: 470 X 320 X 500Mm
- Weight: Approx. 40Kg
Main accessories - Coordinate Anvil: 1 Pc.
- Thin Shaft Anvil: 1 Pc.
- Thin Plate Anvil: 1 Pc.
- Flat Nose Pliers: 1 Pc.
- Large V-Notch Anvil: 1 Pc.
- Small V-Notch Anvil: 1 Pc.
- Diamond Pyramid Penetrator: 1 Pc.
- Micro-Vickers Standardized Block: 2 Pcs.
|
|
Send Enquiry Daksh Microhardness Tester Model Item Code: DHC3 We offer Daksh Microhardness Tester Model Technical Specifications : - Test Forces 0.098, 0.246, 0.49, 0.98, 1.96, 2.94, 4.90, 9.80) N (10, 25, 50, 100, 200, 300, 500, 1000) gf
- Carriage Control: automatic ( loading / holding-up of the load / unloading )
- Amplification of the Microscope: 200 × 400 ×
- Dwell Time of the Test Force: (5-60)s
- Min. Graduation Value of the Testing Drum Wheel: 0.0625um
- Testing Field: 1HV2967HV
- Dimension of the XY Table: 100 × 100 mm
- Movement Field of the XY Table: 25 × 25mm
- Max. height of the specimen : 70 mm
- Max. width of the specimen : 95mm
- Light source : cold light source
- Power Supply : 110V/220V,60/50Hz
- Dimension: (425 × 245 × 490)mm
- Weight: 30Kg
Main Accessories: - XY-stage test table
- Thin specimen test table
- Fork-shaped test table
- Fine wire test table
- Adjustable screw
- 10 × Digital Micro Lens
- Micro Vickers hardness blocks (high medium)
- Gradienter
|
|
Send Enquiry | MODEL HV-5 LOW LOAD VICKERS HARDNESS TESTER
Specifications
Measuring range: 3000HV Test force: 1.961, 2.942, 4.903, 9.807, 19.61, 24.52, 29.42, 49.03N (0.2, 0.3, 0.5, 1, 2, 2.5, 3, 5kgf) Max. height of test piece: 130mm Depth of throat: 100mm Magnifications of the optical micrometer: 500X, 125X Min. scale value of optical micrometer: 0.25μm Power supply: 220V or 110V AC, 50/60Hz Dimensions: 438 x 376 x 685mm Weight: approx. 50kg Main accessories Coordinate anvil: 1 pc. Thin shaft anvil: 1 pc. Flat nose pliers: 1 pc. Large V-notch anvil: 1 pc. Small V-notch anvil: 1 pc. Thin plate anvil: 1 pc. Diamond pyramid penetrator: 1 pc. Vickers standardized block: 2 pcs. Micro-Vickers standardized block: 1 pc. Electronic calculator: 1 pc. | |
|
Send Enquiry
|
© Daksh Quality Systems. All Rights Reserved (Terms of Use)